There are no subcategories to Extrusion
Newest Classifieds in Extrusion
| Photo |
Title 
|
Description |
optional field 2
|
City
|
Country
|
Entry date | Storefront | Edit Anonymous Listing |
|
1 x BARMAG CO-POLYMER FILM EXTRUSION | WORKING WIDTH : 600mm or 300mm YEAR: 1986 (RECONDITIONED 2007) MANUFACTURER: BARMAG ORIGIN: Germany C & F PRICE : GBP £65,000 INCORPORATING: • 3 x CYCLONES FEEDING A CO-POLYMER BARMAG BLENDER • BARMAG 75mm Dia.EXTRUDER TYPE 7E4 (33:1 LD) - 75mm SCREW = GH7E4 41 2000 50/3228 - 75 m/m Dia SCREW is 55.2mm ROOT Dia @ NECK Area, - 70mm ROOT Dia in Middle - 66.3 mm ROOT Dia before 320mm Long Mixer Area. • BARMAG SATELITE EXTRUDER (LEFT) TYPE 3E4(24LD) 30mm BORE • BARMAG SATELITE EXTRUDER (RIGHT) TYPE 3E4(24LD) 30mm BORE • BARMAG SCREEN FILTER UNIT WITH REMOVABLE BLOCK & BREAKER PLATE. • BARMAG MELT PUMP 70CM 3/U MODEL BSW3 • EXTRUSION DIES INC.(700mm) for 600mm (ULTRAFLEX H 75 C CO EXTRUSION FLAT FILM DIE). - FIVE ZONES CARTRIDGE HEATED (220Volt Single Ph) THREE E.D.I. LIPS ARE AVAILABLE with following Serial Numbers :- Lip (1) = No.86-10105 0.080" (Flat) Lip (2) = No.------ raised profile edge.0.080"High Step = No Gap. Lip (3) = No.86-10105 0.040" Fitted - (used for 60 micron film) • EXTRUSION DIES INC. (400mm) for 300mm (ULTRAFLEX H 75 C CO EXTRUSION FLAT FILM DIE). - THREE ZONE CARTRIDGE HEATED (220Volt Single Ph • BARMAG CHILL ROLL & AIR KNIFE - UNITCAST ROLL IS 515mm DIA X 1000mm MAXIMUM SPEED 50.0 METRES / MINUTE (Chill Roller Refurbished July 2007) • INSPECTION FRAME • 1000mm HAUL OFF UNIT - 38 MPM. • BARMAG TURRET SHEET WINDER & TAKE OFF UNIT (MODEL TW17) - 1000mm WIDE • KEYLAGO EDGE TRIM RECOVERY FLAKE FEEDER • RAPIDE OF SWEDEN EDGE TRIM RECLAIM GRANULATOR • CONTROL PANEL & DESK • PRODUCTION RATE : 200kgs/hr • This is a general purpose machine. Materials that can be extruded include - Polyethylene, Polypropylene, Thermoplastic Polyurethane, Thermoplastic Elastomer, TPO, TP, EVA, Sulan (NOT POYESTER or NYLON) | EXT103 | - | United Kingdom | 25 Jan 2012 |